Hey guys
I have decided to put a rebuild kit through my master. As it leaks out dust boot.
Wondering if anyone had some light to where these components go
1: wavy thin shim washer
2: thick rubber round gasket. ( same size of bore).
The owners manual doesn't show these parts.
Ian
The attached image is not specific to our mc's but generic, I think you are talking about the 'master cup' and the 'dished washer'
If you search in google for Master cylinder exploded diagram there are a lot of image returns.
Quote from: imoore on January 23, 2019, 04:40:35 AM
Hey guys
I have decided to put a rebuild kit through my master. As it leaks out dust boot.
Wondering if anyone had some light to where these components go
1: wavy thin shim washer
2: thick rubber round gasket. ( same size of bore).
Ian,
I believe the early 28Q's had a different master than the 29 & 30. See below the picture of the 29U master. I believe the new parts in the picture are placed in the order of reassembly. Removing the end cap isn't necessary, just clean with solvent.
(http://www.1948plymouth.info/1929/images/1929%20MasterCyl-02.jpg)
Here is an old page from my 29 site from a repair in 2006. Sorry out of sight out of mind. Don't remember much about the repair.
http://www.1948plymouth.info/1929/Work_files/2006-8/11192006.htm (http://www.1948plymouth.info/1929/Work_files/2006-8/11192006.htm)
Doesn't answer your question but maybe the pictures might help.