NEW FORUM version is here. If you are experiencing any problems, contact email@example.com WELCOME Auto Registration is turned OFF. In order to register for this forum please contact firstname.lastname@example.org to request access.
You probably need an 8821 Clum switch . No idea what that wire is for you have , unless roadsters are way different . Normal is insulate wire up tube like Chet's . I have soldered to existing wire contact on mine . However it is like Chet's not yours .
Last post by 29plycoop - January 30, 2023, 12:08:19 AM
My 2 cents info -- When trying to replace the horn button wire I had to disconnect the light switch at the end of the steering column. Disconnected the horn wire and cut the old one off where yours is anyway to pull it up through the steering post. the seat had to come out and the column unbolted from under dash and bolts from the the end of the column at the frame to allow it to drop down far enough to slide the tub out. One of my control levers was ok and one was broken off. I made a replacement from one half of a kitchen cabinet handle from Home Depot. Works and looks great I might say. Photo later. After a year or so later found a NOS lever pictured here. Not sure if for lights or the other one. May have to add photos of lever later have to resize photos first.