28Q29U Plymouth Forum

General Category => General Discussion => Topic started by: kimmc on September 24, 2011, 07:33:29 PM

Title: front fenders
Post by: kimmc on September 24, 2011, 07:33:29 PM
Can anyone tell me if '28 sedan front fenders are the same as '29 business coupe front fenders?  Thanks.
Title: Re: front fenders
Post by: Gary 30U on September 25, 2011, 01:23:21 AM
According to my parts book the Q and the U had the same fenders front fenders. The one without the well is part #306160 - right, with the well is #306752. Left is 306161 w/out well and #306753.

The 30U had a different part number, put that may be only because of the added hole to run the horn wire through. ????

Hope this helps.

Gary
Title: Re: front fenders
Post by: kimmc on September 26, 2011, 07:18:03 AM
Yes, this helps a lot.  Thanks Gary. 
Kim Mc
Title: Re: front fenders
Post by: wellery on September 26, 2011, 10:07:21 PM
Gary

Have heard that the rear fenders on a 29U roadster are different than for the other models - is this true??

Cheers

Wayne
Title: Re: front fenders
Post by: Gary 30U on September 28, 2011, 01:30:14 AM
The parts book lists for rear fenders:     Q and U Coupe R-49410
                                                                                 L-49409

                                                           Q and U Sedan  R-49416
                                                                                   L-49417

                                                           Q, U, 30-U Touring  R-49406
                                                                                         L-49405
                                                       
                                                            Q, U, 30-U Roadster  R-49720
                                                                                            L-49721

It is interesting to me that they only list these parts as enamel - is that an indication that they were all Black?

Beginning with the 30-U Coupe, Sedan and Roadster they list different part numbers for (prime), (paint), and (enamel).

Just more info. Hope this answers any questions.

Gary                                                               
Title: Re: front fenders
Post by: wellery on September 29, 2011, 01:38:58 AM
Gary

Your a gem that answers the question! - thanks mate

Wayne
Title: Re: front fenders
Post by: Gary 30U on September 30, 2011, 09:21:47 PM
I just do what I can do. I have a few parts books and info, but most is limited to early cars. I hope this is what these sites are for, and that is to share what we have so all can enjoy.

Gary
Title: Re: front fenders
Post by: 29plycoop on October 03, 2011, 09:18:05 PM
Gary - Not to change the subject but, can you see if you can find a listing in your books for a Mopar radiator #765780? The parts books I have do not list it. Thanks - Rich
Title: Re: front fenders
Post by: Gary 30U on October 04, 2011, 01:06:03 AM
Sorry Rich. I have several different parts books, but nothing close as a raditor for that number.


Happy Motoring, Gary
Title: Re: front fenders
Post by: 29plycoop on October 04, 2011, 01:09:30 PM
Thanks for the try, Still searching - Rich