28Q29U Plymouth Forum

General Category => General Discussion => Topic started by: 29UJohn on January 20, 2017, 08:42:25 PM

Title: Running Board Matt/Rubber
Post by: 29UJohn on January 20, 2017, 08:42:25 PM
I purchased running board matting from Restoration Supply Company.  Jeff Buton told me this was correct for the 29 Plymouth.  The part number is RUB020.  Order a 4 feet piece.  This comes in 48 inch width, so a 4 foot piece will actually be enough to make two full sets.  It also is sold in 36 inch widths.

See attached pages from catalogs.  That is Jeff's handwriting in the RSC page.

Restoration Supply Company, www.restorationstuff.com   760.741.4014

It is also sold by Restoration Specialties and Supply Co.  Their part number is MAT018.
http://www.restorationspecialties.com/
814-467-9842

PS - does the Corrugated Mat - Vinyl look correct for the floor mats?
Title: Re: Running Board Matt/Rubber
Post by: racertb on January 21, 2017, 03:34:01 PM
Thanks John, I may need to upgrade.
Title: Re: Running Board Matt/Rubber
Post by: chetbrz on January 21, 2017, 07:23:30 PM
John,

Thanks for the info, Do you know for sure what rubber matting would be used for the front seat area of the 29 4 door.
I believe rubber was in the front and carpet in the rear.

Chet...
Title: Re: Running Board Matt/Rubber
Post by: 29UJohn on January 21, 2017, 09:31:53 PM
That has been a mystery to me.  All I know is the vague picture in the instruction handbook.
Title: Re: Running Board Matt/Rubber
Post by: chetbrz on January 22, 2017, 10:08:43 PM
Quote from: 29UJohn on January 21, 2017, 09:31:53 PM
That has been a mystery to me.  All I know is the vague picture in the instruction handbook.

Check,  I believe that is the 1/8" ribbed rubber matting.  Widely sold in many places.  Used this for the trunk liner on my 48 Ply.

This is just one of many links to floor mat companies.  Just need to decide on the pattern.

http://www.floormatcompany.com/doormats/commercial-entrance-mats/corrugated-fine-rib-rubber-runner-mats.html
Title: Re: Running Board Matt/Rubber
Post by: racertb on January 23, 2017, 01:06:01 PM
Amazon has something similar as well I found.
Title: Re: Running Board Matt/Rubber
Post by: bobnroman on November 12, 2017, 12:34:01 PM
I have rubber matting for boards and inside floor     can send samples     bobnroman@yahoo.com
Title: Re: Running Board Matt/Rubber
Post by: chetbrz on November 12, 2017, 04:23:35 PM
Bob,

Is it the same as the Restoration Supply mat that John is talking about.  Also do you sell this mat ?  and if so what is the cost ?

Chet...
Title: Re: Running Board Matt/Rubber
Post by: bobnroman on November 12, 2017, 04:51:37 PM
E mail me  at bobnroman@yahoo.com---can send sample
Title: Re: Running Board Matt/Rubber
Post by: frankp on November 13, 2017, 01:39:55 PM
I posted what I'll be using previously in front and running boards.  Restoration Specialties & Supply PN MAT018
Title: Re: Running Board Matt/Rubber
Post by: racertb on October 02, 2018, 01:32:13 PM
Going back to this thread and going to do my floor mat...I have the sample John sent and have seen the pics.  I saw this on Amazon for less than half the price.  Looks very close...4'x3' about $35 shipped free.

https://www.amazon.com/gp/product/B001UYKGTK?ref=em_1p_0_ti&ref_=pe_160290_364712320&pldnSite=1&th=1
Title: Re: Running Board Matt/Rubber
Post by: chetbrz on October 02, 2018, 04:49:36 PM
Hay Ted that really looks good. Do you have original mat and if so is it close

Title: Re: Running Board Matt/Rubber
Post by: racertb on October 03, 2018, 09:23:22 AM
Don't have the original...I think a Model A pattern, but not sure.  It's rubber though.  I do have the correct rubber parts that go around the brake/clutch pedals and the gear shift/parking brake.  I've seen the mats that John and Frank have that look similar to this one.  Those would cost about $60 vs. $35.