Thank you for sticking with me with this problem,
Here's the pics.
SteveG
Here's the pics.
SteveG
NEW FORUM version is here.
If you are experiencing any problems, contact chetbrz@aol.com
WELCOME Auto Registration is turned OFF.
In order to register for this forum please contact chetbrz@aol.com to request access.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: chetbrz on April 07, 2014, 09:23:35 PM
Hi Steve,
If you review the diagram that the Old Man provided it is not beyond the realm of possibility that power could be applied somehow or somewhere to the casing of the coil. Clutching at straws here.., that is why a picture of what you have is so very important. If you have trouble posting the picture email it.
Old Man, great diagram.
I agree, the diagram is great is great, it is simple, and I understand it.
The difference is my coil only has one terminal. and it is mounted thru a big whole in the firewall. Maybe the case is grounded to the frame thru the firewall.
It worked that way since I bought it.
I do not have a scanner and I think the only way I can email it is to take a pic of a sketch.
I am going to try a couple of other ways to hook it up and then try to get a sketch posted somehow.
I'LL be back!
SteveG
Chet...
Quote from: chetbrz on March 31, 2014, 04:23:42 PM
Do you have a separate ignition switch and coil. On the 29 they are a one in the same unit. I would assume the 28 is similar but I have not seen a 28 ignition setup.