• Welcome to 28Q29U Plymouth Forum.
 

News:

NEW FORUM version is here. 
If you are experiencing any problems, contact chetbrz@aol.com
WELCOME Auto Registration is turned OFF. 
In order to register for this forum please contact chetbrz@aol.com to request access.

Main Menu

Info needed on brake line

Started by Articifer Tom, July 06, 2018, 11:47:52 PM

Previous topic - Next topic

Articifer Tom

Looking for info to make a brake reservoir to master tube . Mine was PO changed to braided hose . First is it 1/4 or 5/16 od copper and total length . And if you know nut size and thread . Thanks .   

chetbrz

Tom,

The line from reservoir to master cyl is 5/16" copper tubing with flare connectors.  45 degree flare

You can purchase from Grainger or a good industrial supply company. 

See Link:  ( Click for Long Nuts for proper fittings)  Used on old hydraulics and modern pneumatics.

https://www.grainger.com/category/flared-tube-fittings/tube-fittings/pipe-tubing-and-fittings/plumbing/ecatalog/N-qw3
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

Articifer Tom