Jay Astheimer 610-462-3631 eastern Pa.

Quote from: Articifer Tom on April 03, 2024, 05:06:26 PMJay's had some at Hersey this year .

Just ran across someone needing one these, not familiar with Jays is it a shop? Do you have contact info?

You will not have to pull column if you split eng/trans .  Just drop clutch out . Trans hangs in on wings . As for steering wheel . Yes use puller is taper shaft . to assure no bakelite damage drill metal for pull bolts . Here is pic of me doing mine .

Tom, thanks, I don't need the trans out, so I'll see if I can just leave it in, then.

Jay's had some at Hersey this year .

May want to leave trans in . Break at engine side of bell housing .

Thanks for the reply!  My other problem is that I took off the nut on the steering wheel, but the steering wheel won't budge.  Is there something I'm missing on that, or do I just need to use a little more force removing it from the steering column?

The shaft will stay attached to the sector (box)and the steering sector will come out the bottom shaft & all. You will have to take the pitman arm off and unbolt the sector from the frame. While I had mine out I disassembled the sector on the bench & cleaned the old grease out and packed it with John Deer corn head grease. If you don't have the instruction manual get one as it tells how to make all the adjustments. Its different than more modern units I've worked on but simple.

Hello,
  I need to remove my engine for a redo of some kind, but it's a lot more work than I thought.  My current work is trying to remove the steering column and maybe the steering box, so I can get clearance to remove the engine, since it has those wide legs on it in the back and won't clear the steering column.

  I've removed the clum switch, hardware, and the throttle and headlight levers from the top of the steering wheel.  I've also unscrewed the steering column to the point where I can move it by hand now, but it won't come free from the steering box.  Obviously, there are gears in there, but I'm not sure what to do to remove the steering column.  I wanted to ask the group before I start taking the steering box apart and/or do any damage, in order to try to figure this out.

Thanks for any help!  -Chris

Dave I went back over there and I had ran into Dan. He had some transmission parts for sale a while back but sold them before I saw the ad. I sent him a PM about his car.