• Welcome to 28Q29U Plymouth Forum.
 

News:

NEW FORUM version is here. 
If you are experiencing any problems, contact chetbrz@aol.com
WELCOME Auto Registration is turned OFF. 
In order to register for this forum please contact chetbrz@aol.com to request access.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - 1929luv

#1
General Discussion / Stuff for sale removed
May 29, 2012, 10:44:57 PM
I had the spark levers listed on stuff for sale and it has been removed anlong with a lot of other good info.  Thanks Craig
#2
General Discussion / bumpers
August 10, 2011, 10:46:31 PM
Can yall help on my bumper project.  I have dissassemble and can't get back together!!!  LOL  I would like picture of the front and rear bumpers so I can see the brackets and how they attach.  I have numorous brackets and they are odd number of them so someone could have had some homemade stuff on it.  I just need to see pictures form the top to show brackets.  I can see the different types of fronts in the picture portion of forum. Thanks A lot Craig
#3
General Discussion / Gas tank mounting
May 22, 2011, 08:10:04 PM
I am ready to put my gas tank in and do not know what goes up on top between frame and tank.  It had a home made tank in it and it was just tighten with straps to frame.  I think there should be something on top of tank because it just hits the seams on outer edge of tank. So any mounting instructions would be helpful. Thanks Craig
#4
General Discussion / Ign Switch E-bay# 230557686153
January 23, 2011, 08:51:37 PM
Found Ign switch on e-aby good price but no key E-bay #230557686153 good ;uck Craig Hurry buy now
#5
General Discussion / Glass patterns '29 4dr
January 19, 2011, 09:26:35 PM
I have glass patterns for a '29 plymouth (All Glass) You pay for shipping and packing at it is your just let me know. I want to get rid of it QUICKLEY!!!! Thanks Craig
#6
General Discussion / exterior handle screw interior
October 31, 2010, 09:07:37 PM
Need to know how the screw is on the exterior 29 plymouth door handle on the inside of car.  Does it go through the door panel or is it behind the panel. And what does it look like.  Ther were some on e-bay #140444736221 and want to know if this is it. Thanks for the replies!!! Craig 
#7
General Discussion / 29 ply HUB CAP
August 21, 2010, 05:02:40 PM
I am looking for one more 29 ply. hubcap can anyone help thanks Craig
#8
General Discussion / Trottle spring location
July 13, 2010, 11:29:28 PM
Can someone please tell me were the spring for the trottle is supose to hook in.  I can see where it goes on the rod at steering wheel rod but what does it hook in thanks Craig I could not see it in the engine picture on here.
#9
General Discussion / 4Dr sill plates
March 04, 2010, 10:22:26 PM
My sill plates for the '29 4dr are real bad shape and have tried to use some ford ones and they are all to short does any one have any ideas were to get some or have some one that makes them thanks Craig
#10
General Discussion / Running board lenght
February 28, 2010, 10:25:05 AM
I need a running board lenght for 29 ply.  I have a 4 dr sedan but think they are all the same.  If I can get 3 or more mesurements that would be nice.  The guy said to measure mine but the fenders are not on yet and the ones that came off were cobbled and need to give him time to get them done so i can put the car together when they come. Thanks Craig
#11
General Discussion / 28 coupe found
February 17, 2010, 09:43:35 PM
 I have found a 28 coupe if interested look this guy up.  If some one buys it I would like to buy the column spark rods.  Good luck Craig   info is

1928 plymouth - parts for sale - I have been collecting this car in parts for many yrs and now have most of the major parts cept frame and engine block.  list includes: - 2 full rear quarters sets,  front spindle, all 4 brake drums, reaer housing, steering column and 2 wheels, original like new honeycomb rad, rad chrome x2, gullwing hood, firewall, piston rods, trunklid, doors and handles and winders too


my location is in Calgary Aberta Canada


email: Boshido_Auto_Rescue@live.com


phone:403-457-3811


#12
General Discussion / Spark plug wires
February 06, 2010, 09:31:10 AM

Does any one have the correct lenght for the 29 ply plug wires and coil wire.  Mine has been altered and the car is at the wood shop and want put this together thanks Craig
#13
General Discussion / Dash rail Screws
January 23, 2010, 08:37:19 PM
Does any one have info on dash rail screws for the 29 plymouth thanks Craig
#14
General Discussion / window channel 29 ply
January 21, 2010, 10:00:00 PM
Does the window channel just go on the sides for the glass to slide in and then a window cushion on top or do you take the channel all the way around to seal windows.  thanks Craig
#15
Does any one know the differences between the 30 and 29 frames and Engines?  Do they use the same wood wheel and drums I have found the 28 drums are diff from 29 but have never compaired the 30 to 29 I have a 29 and have an opportunity to buy a 30 rolling chassis for parts and just wanted to  know if and how many differences thanks Craig
#16
General Discussion / 1929 Ignition Switch
January 04, 2010, 09:56:36 PM
As yall Know i still in need of an Ignition Switch.   What is the difference between a '29 and '30.    Maybe just the obscuction face plate????  Thanks For yalls help Craig
#17
General Discussion / ingnition picture need
November 25, 2009, 10:12:28 PM
 I need a picture of an ignition swtich so I can e-mail my lock smith what it looked like he lost mine.  In the car is fine so if any of you will take a head on picture of a switch for the 29 ply it would help me out a lot thanks Craig
#18
General Discussion / casting new door handles
November 10, 2009, 08:18:54 PM


Casting Stainless


I am considering casting new door handles out of stanless It is going to cost me about 350 for locking handles with keys and 200 for regular handles and it would be cheaper if more are bought so if anyone is enterested let me know.  These will last a life time as the caster told me I know they expencive. thanks Craig
#19
General Discussion / new wiring harness 29 ply
November 09, 2009, 08:42:12 PM
 Does anyone know were to buy a good quality complete wiring harness for a 29 ply that you do not haft to send them one.  Thanks Craig