• Welcome to 28Q29U Plymouth Forum.
 

News:

NEW FORUM version is here. 
If you are experiencing any problems, contact chetbrz@aol.com
WELCOME Auto Registration is turned OFF. 
In order to register for this forum please contact chetbrz@aol.com to request access.

Main Menu

Front motor mount - how does it attach? 2 bolts or 4?

Started by 29UJohn, October 11, 2009, 08:31:34 PM

Previous topic - Next topic

29UJohn

How should the front motor mount be secured between the engine and the frame?  My 29U's is attached with just two long bolts.  However, I saw one 29 with four small bolts, two to attach the mount to the engine, and two bolts with nuts to secure the mount to the frame.  This seems like a better way to mount it.
John
29U 4 dr Sedan
???
John
1929U 4 Dr

chetbrz


I have 4 bolts on mine that's the way it was when I got the car.
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

29plycoop

#2
My '29 Ply Coupe front motor mount was a little on the soft side so sent off and was re-vulcanized. (Thanks to Antique Auto Parts Cellar and Tom Hannaford) It was attached with two bolts and nuts to the frame and two bolts to the engine.  Log in to see attached photos. Happy Motoring!!!! - Rich
Plymouth and inovation go hand in hand.

29UJohn

Thanks!  I will re-attach the motor mount the correct way.  Tom Hannaford revulcanized mine also and did a great job.  It is one of his specialties. 
John
1929U 4 Dr