Recent Posts

Pages: [1] 2 3 ... 10
1
General Discussion / Re: @@@ Happy Thanksgiving @@@
« Last post by 29plycoop on November 26, 2021, 06:43:40 PM »
Happy Holidays Everyone !! Great Health To You And Yours!!
2
General Discussion / Re: @@@ Happy Thanksgiving @@@
« Last post by Articifer Tom on November 25, 2021, 11:36:31 AM »
Same to all from here !
3
General Discussion / Re: Vacuum tank
« Last post by Russ T. Fender on November 23, 2021, 01:32:15 PM »
Thanks, that was what I thought but better safe than sorry.  I have a few 2lb coffee cans with odd old fitting and I am hoping I can sort through them and configure the line with just one fitting on each end.  Probably not but it's worth a shot.  Thanks again and Happy Thanksgiving!
4
General Discussion / Re: Vacuum tank
« Last post by chetbrz on November 23, 2021, 12:34:34 PM »
1/8" soft copper tubing.  It's been a while since I thought about this so please review the attached project post for conversion information.
 
FYI... 186 miles since I primed the pump and still working without issue.   

http://www.1948plymouth.info/1929/Work_files/2019/12162019.htm

PS... This is what I did there may be other solutions I'm not aware of.
5
General Discussion / Vacuum tank
« Last post by Russ T. Fender on November 23, 2021, 10:44:48 AM »
Does anyone know what the proper size is for the line running from the oil pump to the vacuum tank?
6
General Discussion / @@@ Happy Thanksgiving @@@
« Last post by chetbrz on November 22, 2021, 09:12:09 AM »

I hope you all have a Great Holiday.  Thanks for all the help over the years !!
7
General Discussion / Re: It's Back!!! HERSHEY .
« Last post by hursst on November 21, 2021, 06:56:36 PM »
I think that there were a few folks staying away because of COVID issues, but more importantly, most, if not all of our international friends were not in attendance, which will keep attendance lower, especially Canada.  There were a few Ply parts, but mostly common things like radiator caps.  I'm amazed at the great rare Ply parts I've found at Hershey, just over the last 5 years.
8
General Discussion / Re: Split Rim Question
« Last post by Marc28plym on November 14, 2021, 05:45:47 AM »
I will need to check the size of my original wheels (are they all 19"?), but I do have 4 of them available if you or anyone needs them.  Shipping from CA will not be cheap, as they are large and quite heavy, but I'll help as I can - I'm not looking to cash in here, just to help someone's cause.  Prior to the purchase of my car, the one wheel shown (note, photos is ~2 years old) was "restored", though by whom I don't know.  The other 3 are unrestored, and the wood is completed but are quite "weathered".  To insure a more speed reply, send me notes directly at x15builder@hotmail.com.  Take care all. 
9
General Discussion / Re: Split Rim Question
« Last post by chetbrz on November 09, 2021, 01:30:18 PM »
He said a month or two. Before spring time is ok by me.

Fingers crossed.  The sooner the better.
10
General Discussion / Re: Split Rim Question
« Last post by Russ T. Fender on November 09, 2021, 12:32:04 PM »
He does great work. Hopefully he is not too backed up.  There were times when he was almost a year behind.
Pages: [1] 2 3 ... 10