Author Topic: Sealing to rear axel inner 1929  (Read 136 times)

jjohn

  • Full Member
  • *****
  • Posts: 26
  • 1929U 2dr sedan
    • View Profile
Sealing to rear axel inner 1929
« on: March 02, 2019, 06:39:12 PM »
Hi,
Does anyone know where I can buy sealing parts for the rear axel, inner sealing (1929 U)?
The dimensions looks like 1 3/8 x 2 5/16?
I have asked Hagens auto parts but he don't have any.

« Last Edit: March 02, 2019, 09:37:23 PM by jjohn »

chetbrz

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 1493
    • View Profile
    • My Space on the Web
Re: Sealing to rear axel inner 1929
« Reply #1 on: March 08, 2019, 04:59:16 PM »
Hi John,

From Tod's web site I copied this info.  The Timken#'s seem to be good.  You might want to check the Plymouth part numbers against what you are looking for.

40417 Differential bearing cone and rollers (Q, U, 30-U up to 1559672 US built and all Canadian built)
  Interchange/Vendor:  Timken 28157 

40418 Differential bearing cup (Q, U, 30-U up to 1559672 US built and all Canadian built.)
  Interchange/Vendor:    Timken 28315

I think I miss understood your post.  I don't have info on the seals.  I think Dave came up with a solution I vaguely remember reading something about this in a past post.  Anyway there might be compatible seals for the Timken bearings. ?

Maybe this link might help you:

https://www.ply33.com/Parts/group3

Chet...
« Last Edit: March 08, 2019, 05:08:24 PM by chetbrz »
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

jjohn

  • Full Member
  • *****
  • Posts: 26
  • 1929U 2dr sedan
    • View Profile
Re: Sealing to rear axel inner 1929
« Reply #2 on: March 10, 2019, 07:50:12 PM »
Thanks Chet,

Can you recommend any supplierr of bearings in US?

chetbrz

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 1493
    • View Profile
    • My Space on the Web
Re: Sealing to rear axel inner 1929
« Reply #3 on: March 10, 2019, 09:28:21 PM »
Thanks Chet,

Can you recommend any supplierr of bearings in US?

I donít buy enough bearings to recommend someone.  Basically though, if you have a modern bearing number just key it into your browser and you should come up with a dozen companyís selling the item. 

If you have dimensions and are trying to match a seal try Granger.

See link to SKF Standard Single Lip Rotary Shaft Seals:

https://www.grainger.com/search/power-transmission/bearings/rotary-shaft-seals?sst=1&ts_optout=true&searchQuery=bearing+seals

Good Luck,  Chet...
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

Crazydave

  • Senior Forum Member
  • ****
  • Posts: 242
    • View Profile
Re: Sealing to rear axel inner 1929
« Reply #4 on: March 12, 2019, 03:49:31 AM »
I didn't replace mine when I did the bearing. (I should have) I see myself pulling the whole rear end out sometime in the next couple years. Pinion is spraying oil, seals leaking etc.

When I pull the seal I will take it to these guys (see link below) rarely stumped, can usually cross reference an oil felt seal to a modern one. If you have the exact dimensions or maybe an old part number they can get you squared away.

https://www.cutter-sales.com/

racertb

  • Senior Forum Member
  • ****
  • Posts: 538
    • View Profile
Re: Sealing to rear axel inner 1929
« Reply #5 on: March 12, 2019, 03:34:45 PM »
I thought I saw some felt seals for our cars on eBay a couple days ago.

chetbrz

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 1493
    • View Profile
    • My Space on the Web
Re: Sealing to rear axel inner 1929
« Reply #6 on: March 13, 2019, 01:12:30 AM »
I didn't replace mine when I did the bearing. (I should have) I see myself pulling the whole rear end out sometime in the next couple years. Pinion is spraying oil, seals leaking etc.

When I pull the seal I will take it to these guys (see link below) rarely stumped, can usually cross reference an oil felt seal to a modern one. If you have the exact dimensions or maybe an old part number they can get you squared away.

https://www.cutter-sales.com/

Dave did you get a throw out bearing from these guys ?
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

Crazydave

  • Senior Forum Member
  • ****
  • Posts: 242
    • View Profile
Re: Sealing to rear axel inner 1929
« Reply #7 on: March 13, 2019, 01:54:20 AM »
"Dave did you get a throw out bearing from these guys ?"

I didn't replace it, but all bearing parts front and rear I did replace where from them. Probably pictures and part numbers in the old build thread. I know tractor guys use them as well for hard to find parts. They were good to deal with, but its been a few years since I have used them. Have a feeling I will be back soon.