Author Topic: 29 Build Thread - Part 2  (Read 1008 times)

frankp

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 418
  • 29U 4dr Sedan #Y089WE
    • View Profile
Re: 29 Build Thread - Part 2
« Reply #45 on: February 14, 2018, 08:28:33 PM »
It will have to someone else, Chet.  My car is not accessible at this time.   frank
frank p

29UJohn

  • FOUNDING MEMBER
  • Senior Forum Member
  • *****
  • Posts: 382
  • 1929 U 4 Door Sedan
    • View Profile
Re: 29 Build Thread - Part 2
« Reply #46 on: February 15, 2018, 01:58:40 AM »
It is just shy to 3+1/8 inches on my 4door sedan
John
John
1929U 4 Dr

chetbrz

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 1260
    • View Profile
    • My Space on the Web
Re: 29 Build Thread - Part 2
« Reply #47 on: February 15, 2018, 02:59:03 AM »

Thanks John,

I believe we went down this path awhile back but just needed to check.  Three inches works for me and if you add the height of the metal you get a little more than 3".  It appears that we have a 9 degree cut on the top of the front pan wood support to facilitate the slope of the rear seat pan to the rear frame.  It all logically comes together.  The sides are a right triangle with a base of 17" and height of 3" using math the calculated angle = 9.8 degrees.  I measured approximately 9 degrees.  So I am in the ballpark.

Thanks for the quick response,  Chet...
http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

chetbrz

  • POC MEMBER
  • Senior Forum Member
  • ****
  • Posts: 1260
    • View Profile
    • My Space on the Web
Re: 29 Build Thread - Part 2
« Reply #48 on: February 17, 2018, 02:12:47 AM »
The Full Floor Project

Due to the length of this task and the number of pictures I posted a link to the blow by blow description below:
The beginning may look familiar but keep scrolling down.

http://www.1948plymouth.info/1929/Work_files/2018/02162018.htm



Cheers, Chet...

Link to Build Thread Part 1
http://www.1948plymouth.info/28Q29U/index.php?topic=1102.0

http://www.1948Plymouth.info           Web Master - Forum Administrator - AACA member

29UJohn

  • FOUNDING MEMBER
  • Senior Forum Member
  • *****
  • Posts: 382
  • 1929 U 4 Door Sedan
    • View Profile
Re: 29 Build Thread - Part 2
« Reply #49 on: February 17, 2018, 04:45:29 AM »
Looking real good!
John
1929U 4 Dr