I know that somewhere on this site someone had reproductions of these levers at one time. Can't seem to find them with a search. I know a fellow that could use some if available. Any help would be appreciated.

Happy Motoring, Gary

Gary,

29plycoop – mentioned in a post that he wanted to have some made.  Maybe try emailing him.  You can link to his email via his profile.  See link.

PS I remember the post you are talking about but I can't find it either ?

http://www.1948plymouth.info/28Q29U/index.php?topic=317.0

Chet...

Not much help right now for you guys but this Guy ( Glen ) does first rate work and can and will re-produce anything hardware wise that you guys would need. Not cheap but cheaper if there is more than one item to do ...........http://www.vintageandclassicreproductions.com/plymouth.htm

I am the one that reproduced the levers.  I have one set left but canr find them at the moment.  If you still want a set let me know and i will look. Thanks Craig

I have found the spark control levers let me know thanks Craig

I sure need a pair of levers.  I have pulled the throttle and light rods out of the steering column; there is a flat disc at the top end of the rods, that the levers were mounted on. Do replacement levers come with the disc attached?  It certainly looks that way as the stump of the levers is still attached to the discs.  I'd appreciate hearing from you or anyone else who has knowledge of these levers. Thanks    Gary C.  tinCan 449

That makes two of us. I need them also. Mine work, but are 2 inch stubs left over from what they were.

the Spark controls are just cast handles that have been chromed as of now like picture shows.  They are bonded to the steel handle rods and that can be done with a 3M product called panel bond or I can put them on a set of lever rods I have now.  I only have one set handles left that has been cast and chromed.  I can cast more if needed.  Here are the picks of before and after of the levers.  Let me know Craig